Receiving Manually In Tel Mode - Samsung SCX-6220 User Manual

Laser mfp
Hide thumbs Also See for SCX-6220:
Table of Contents

Advertisement

N
:
OTES
• If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine is
connected to your machine, your machine will automatically go
into FAX mode after a predefined number of rings.
• If your answering machine has a 'user-selectable ring counter',
set the machine to answer incoming calls within 1 ring.
• If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.

Receiving Manually in TEL Mode

1
In the fax idle mode, press Menu until "Fax Setup" displays
on the top line.
2
Press the scroll buttons until "Receive Mode" displays on the
bottom line and then press Enter.
3
Using the scroll buttons, select "Tel" and then press Enter.
4
When the ringer sounds, press On Hook Dial.
5
If you hear a fax tone, press Start.
The machine begins receiving a fax, and returns to Standby
mode when the reception is complete.
R
3.5
ECEIVING A FAX
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-6320fScx 6320f - b/w laser - all-in-one

Table of Contents