Auto Fit Copying; Clone Copying - Samsung SCX-4216F User Manual

Digital laser mfp
Hide thumbs Also See for SCX-4216F:
Table of Contents

Advertisement

Auto Fit Copying

This special copy mode can be applied when you load document
only using the document glass. For SCX-4116/4216F, if a
A
document is detected in the ADF, the Auto Fit does not work.
1
Load the document to be copied on the document glass,
and close the cover.
2
Press Special.
3
Press Special or the scroll button ( ¦ or ‹ ) until "Autofit"
appears on the bottom line.
4
Press Enter to save the selection.
5
If necessary, customise the copy settings including number
of copies, contrast and image type by using the control
panel buttons. See "Setting Copy Options" on page 4.6.
N
: You cannot adjust the copy size using the Reduce/
OTE
Enlarge button while the Auto Fit copying is enabled.
6
Press Start Copy or Start Copy/Fax to begin copying.

Clone Copying

This special copy mode can be applied when you load document
only using the document glass. For SCX-4116/4216F, if a
document is detected on the ADF, the Clone copying feature
does not work.
1
Load the document to be copied on the document glass,
and close the cover.
2
Press Special.
3
Press Special or the scroll button ( ¦ or ‹ ) until "Clone"
displays on the bottom line.
4
Press Enter to save the selection.
4
C
4.9
OPYING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-4116Scx-4016

Table of Contents