Installing A Network Interface Card - Samsung SCX-6220 User Manual

D.2
I O
NSTALLING PTIONS

Installing a Network Interface Card

To install an optional network interface card, take the following
steps:
C :
AUTIONS
• DISCONNECT THE POWER CORD. Never remove the control
board while the printer is plugged in. To avoid the possibility of
an electrical shock, always disconnect the power cord when
installing or removing ANY printer options.
• DISCHARGE STATIC ELECTRICITY. The control board and the
interface card are sensitive to static electricity. Before installing
or removing the card, discharge static electricity from your body
by touching something metal, such as the metal back plate on
any device plugged into a grounded power source. If you walk
around before finishing installation, discharge any static
electricity once again.
1
Unpack the network interface card (Order number: SCX-
6320NA). Make sure that there is no missing or damaged
part.
Network Interface Card SyncThru CD-ROM
SDRAM memory
2
Turn your machine off and unplug the power cord and all of
cables from the machine.
Alphabet keypad
Network Scan
CD-ROM
User's Guide