Copying Transparencies - Samsung SCX-6220 User Manual

7
If necessary, you can customize the copy settings including
copy size and image type using the control panel buttons.
See "Setting Copy Options" on page 4.6.
8
Press Start to begin copying.
9
When the copying is completed, press Stop/Clear to
cancel Covers feature.

Copying Transparencies

The Transparencies feature allows the creation of a single set of
transparencies with blank dividers. When dividers are selected a
transparency set will always be single-sided on transparency
stock with no stapling.
1
Load the document to be copied on the document glass,
and close the cover.
2
Make sure that you have selected the required paper tray.
See page 4.2.
3
To enter Transparencies feature, press Menu until you see
"Copy Features" on the top line of the display.
4
Press the scroll buttons to display "Transparencies" on the
bottom line and press Enter.
5
Press the scroll buttons to select "Off" or "MP Tray" and
press Enter to save the selection.
Use MP Tray option to place a blank sheet between each
transparency. If you select this option, select the desired
paper tray source for the Transparency paper.
6
If necessary, you can customize the copy settings including
copy size and image type using the control panel buttons.
See "Setting Copy Options" on page 4.6.
7
Press Start to begin copying.
8
When the copying is completed, press Stop/Clear to
cancel Transparencies feature.
4
C 4.15
OPYING