Obtaining An Ip Address In Windows 2000 Or Windows Xp; Obtaining An Ip Address On Macintosh; Connecting A Pc To The Usb Port; Setting Up The Wireless Lan - Motorola SBG 1000 Manual

Obtaining an IP address in Windows 2000 or
Windows XP
To obtain an IP address in Windows 2000 or Windows XP, complete the
following steps on each Ethernet client PC running Windows 2000 or Windows
XP:
1. On the Windows Desktop, click the Start button.
2. Select Run and the Run window is displayed.
3. Type cmd and click the OK button to display a command prompt window.
4. Type ipconfig /renew and press ENTER to obtain an IP address for the PC
from the DHCP server on the SBG1000.
5. Type exit and press ENTER to return to Windows.
Back to Top

Obtaining an IP address on Macintosh

To obtain an IP address on Macintosh, it is recommended that the instructions in
the Macintosh user manual be followed.

Connecting a PC to the USB Port

To connect a PC to the USB port, complete the following steps:
1. Connect the USB cable to the USB port on the SBG1000.
2. Connect the other end to the USB port on the computer.
3. Install the USB driver following the appropriate procedure in Setting Up a
USB Driver.
Back to Top

Setting Up the Wireless LAN

Note: Before plugging in the USB cable, be sure the Motorola SBG1000
Wireless Cable Modem Gateway CD-ROM is inserted in the PC CD-ROM drive.
Back to Top
Installing the Optional External Diversity
Antenna
The maximum wireless operation distance depends on the type of materials
through which the signal must pass and the location of the diversity antennas
and clients (stations).