Patton Pots Interface; Wiring - Extron electronics DMP Plus Series Configuration Manual

DMP Plus Series C V / C V AT – Patton POTS

1.1.3 Patton POTS interface

1.1.4
Figure 3 DMP 64 C V AT Plus
Figure 5 Patton SN4112/JO/EUI – Rear Panel
• LAN port
• IP Address: 192.168.1.253 / 255.255.255.0
• Firmware: R6.11 2019-07-02

Wiring

• Using a CAT5/6 network cable
o Directly connect LAN 2 of DMP Plus to
o Patton 10/100 ENET port / ETH 0/0 port
• Connect the analog Telephone POTS line to the Voice Port
o Port 1
2 1
Revision Date:
10/16/2020
Figure 4 Patton SN4112/JO/EUI
Figure 6 Analog Phone Line – POTS
Page 6 of 28
FXO 0/0