Upload Configuration File - Extron electronics DMP Plus Series Configuration Manual

DMP Plus Series C V / C V AT – Patton POTS

2.4 Upload configuration File

• If the firmware has been updated, verify the unit has been restarted
• From the Patton webpage Select Import/Export, Upper Left corner
• Select Import Configuration, then click Choose file
• Once the File has been imported the Patton will need to be rebooted / reloaded
o
o Select the "Patton_Config.cfg" attached to this PDF document
 Refer to Appendix A
o Select Import
Revision Date:
10/16/2020
to download the files from the PDF
Page 11 of 28