To Restart / Reload, Select Reload In The Lower Left; If Any Changes Are Made, They Will Need To Be Saved To The Startup-Config - Extron electronics DMP Plus Series Configuration Manual

DMP Plus Series C V / C V AT – Patton POTS

2.4.1 To restart / reload, select Reload in the lower left

2.4.2
 The save button is located in the lower Left, right above Reload
 Any changes not saved will be lost when the unit is Reload

If any changes are made, they will need to be saved to the startup-config

Revision Date:
10/16/2020
Page 12 of 28