Intermatic Grasslin talento smart B15 Operating Instructions Manual page 91

Preparing for the connection
1. Switch on Bluetooth on the mobile device.
1 6 12 18
C H 1
1 3 . 0 3 . 2 0 1 6
09 :0 0
5 1
1 2 Menu
1
Fig. 27: Establishing a Bluetooth connection to the DIN-rail timer
1. Press the Bluetooth button (Fig. 27/
The Bluetooth symbol flashes for two minutes. A list of all available DIN-rail timers in the vicin-
ð
ity is displayed on the mobile device.
The operation must be completed within two minutes, otherwise the operation has to be
repeated.
After a connection has been established once, the DIN-rail timer automatically connects to the
mobile device when it is in the vicinity.
The Bluetooth connection is maintained for two minutes in the event of a power failure.
Establishing the connection
2. The DIN-rail timer has to be selected on the mobile device.
If there is an active connection, the DIN-rail timer displays the Bluetooth symbol (FIX).
ð
24
) on the DIN-rail timer.
1
EN
91