Mercedes-Benz GLE Operator's Manual page 43

Fastening and adjusting the seat belts
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can‐
not be pulled out any further.
Always engage seat belt tongue
#
seat belt into seat belt buckle 1
responding seat.
Press and hold the seat belt outlet release
#
and slide seat belt outlet
position.
Let go of the seat belt outlet release and
#
ensure that seat belt outlet
position.
* NOTE Deployment of the Emergency
Tensioning Device and side air bag when
the front passenger seat is unoccupied
If the seat belt tongue is engaged in the seat
belt buckle of the unoccupied front
passenger seat, the Emergency Tensioning
Device and the side air bag may also deploy
in the event of an accident along with other
systems.
Only one person should use each seat
#
belt at any one time.
Seat belt adjustment function
2 of the
of the cor‐
Vehicles with PRE-SAFE
is not pulled tightly across your body, the seat
belt adjustment may automatically apply a cer‐
tain tightening force. Do not hold the seat belt
3 into the desired tightly while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia sys‐
3 locks into tem (
/
Releasing seat belts
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Activating/deactivating seat belt adjustment
via the multimedia system
Multimedia system:
©
4
Activate or deactivate
#
Seat belt warning function for the driver and
front passenger
® : If the front seat belt
The ü seat belt warning lamp in the instru‐
ment display is a reminder that all vehicle occu‐
pants must wear their seat belts correctly.
Occupant safety
page 41).
Settings Vehicle
5 5
Belt Adjustment.
41