Mercedes-Benz GLE Operator's Manual page 312

310 Maintenance and care
Vehicles with surround view camera: the
R
front image is deactivated at speeds above
11 mph (18 km/h).
Vehicles with AIRMATIC: the vehicle is low‐
R
ered to the previously set chassis level.
Vehicles with E-ACTIVE BODY CONTROL:
R
the vehicle is lowered to the previously set
chassis level.
Activating/deactivating automatic car wash
mode
Requirements:
The vehicle is stationary.
R
The engine is running.
R
Multimedia system:
© Settings Quick Access
4 5 5
Activating automatic car wash mode
Select Automatic Car Wash Mode.
#
Select Start.
#
If one of the settings cannot be selected, this is
displayed by a % behind the respective set‐
ting.
% For an overview of the settings made when
activating automatic car wash mode
( page 308).
/
Deactivating automatic car wash mode
Select Stop.
#
The automatic car wash settings are reset.
% The automatic car wash mode is automati‐
cally deactivated as soon as a speed of
12 mph (20 km/h) is exceeded.
Notes on using a power washer
& WARNING Risk of an accident when
using power washers with round-spray
nozzles
The water jet can cause externally invisible
damage.
Components damaged in this way may unex‐
pectedly fail.
Do not use a power washer with round-
#
spray nozzles.
Have damaged tires or chassis parts
#
replaced immediately.
To avoid damage to your vehicle, observe the fol‐
lowing when using a power washer:
Keep the SmartKey at least 10 ft (3 m) away
R
from the vehicle. Otherwise the tailgate
could open unintentionally.
Maintain a distance of at least 11.8 in
R
(30 cm) to the vehicle.
Vehicles with decorative foil: parts of your
R
vehicle are covered with a decorative foil.
Maintain a distance of at least 27.6 in
(70 cm) between the foil-covered parts of the
vehicle and the nozzle of the power washer.
Move the power washer nozzle around whilst
cleaning. The water temperature of the
power washer must not exceed 140 °F
(60 °C).
Observe the information on the correct dis‐
R
tance in the equipment manufacturer's oper‐
ating instructions.