Mercedes-Benz GLE Operator's Manual page 202

200 Driving and parking
Press the H button.
#
Activating Active Distance Assist DISTRONIC
To activate without a stored speed: press
#
rocker switch 1 up M or down N, or
select J with the left rocker switch.
or
To activate with a stored speed: select
#
J with the left rocker switch.
Remove your foot from the accelerator pedal.
#
The current speed is stored and maintained
by the vehicle.
Adopting a detected speed limit
Activate Active Distance Assist DISTRONIC.
#
If a traffic sign has been detected and is dis‐
#
played in the instrument cluster: select J
with the left rocker switch.
The maximum permissible speed on the traf‐
fic sign is adopted as the stored speed. The
vehicle adapts its speed to that of the vehicle
in front, but only up to the stored speed.
Pulling away with Active Distance Assist
DISTRONIC
Activate Active Distance Assist DISTRONIC
#
and remove your foot from the brake pedal.
Select J with the left rocker switch.
#
or
Depress the accelerator pedal briefly and
#
firmly.
The functions of Active Distance Assist
DISTRONIC continue to be carried out.
Deactivating Active Distance Assist
DISTRONIC
& WARNING Risk of accident due to Active
Distance Assist DISTRONIC still being
activated when you leave the driver's
seat
If you leave the driver's seat while the vehicle
is being braked by Active Distance Assist
DISTRONIC only, the vehicle can roll away.
Always deactivate Active Distance
#
Assist DISTRONIC and secure the vehi‐
cle to prevent it from rolling away
before you leave the driver's seat.
Select O with the left rocker switch.
#
%
If you brake, deactivate ESP ® or if ESP
intervenes, Active Distance Assist
DISTRONIC is deactivated.
Increasing or decreasing the speed
1 mph (1 km/h): press rocker switch
#
M or down N to the pressure point.
or
5 mph (10 km/h): press rocker switch
#
M or down N beyond the pressure
point.
or
Accelerate the vehicle to the desired speed
#
and press rocker switch 1 up M.
Changing the specified distance to the vehi‐
cle in front
To reduce the specified distance: press
#
the right rocker switch up (Ñ).
To increase the specified distance: press
#
the right rocker switch down (Ò).
®
1 up
1 up