Mercedes-Benz GLE Operator's Manual page 147

air distribution setting for the driver's side will be
adopted automatically for all climate control
zones.
Press the 0 button.
#
The synchronization function will be deactivated
if the settings for one of the other climate zones
are changed.
Activating/deactivating the climate control
synchronization function via the multimedia
system
Climate control can be set centrally using the
synchronization function. The driver's settings
for temperature, air quantity and air distribution
are adopted automatically for all climate zones.
Call up the air conditioning menu
#
( page 143).
/
Select First Row of Seats.
#
Select SYNC.
#
Removing condensation from the windows
Windows fogged up on the inside
Press the à button.
#
If the windows continue to fog up: press the
#
¬ button.
Windows fogged up on the outside
Switch on the windshield wipers.
#
Press the à button.
#
Switching air-recirculation mode on/off
Press the g button.
#
The interior air will be recirculated.
Air-recirculation mode automatically switches to
fresh air mode after some time.
% If air-recirculation mode is switched on, the
windows may fog up more quickly. Switch on
air-recirculation mode only briefly.
Switching the residual heat on or off
Requirements:
Climate control 145
The vehicle is parked.
R
It is possible to make use of the residual heat
from the engine to continue heating or ventilat‐
ing the front compartment of the vehicle for
approximately 30 minutes, depending on the
temperature set.
To activate: press Á button.
#
Residual heat will be switched off automatically.
Switching the residual heat in the rear
passenger compartment on/off
Requirements:
The vehicle is parked.
R
When the residual heat of the engine is activated
in the rear compartment, you can heat or venti‐
late the rear passenger compartment for approx‐
imately 30 minutes.
Press button 5 ( page 143).
/
#