Mercedes-Benz GLE Operator's Manual page 102

100 Seats and stowing
Installing
Insert the head restraint such that the
#
notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until it
#
engages.
Fold the rear seat backrest back until it
#
engages.
Configuring the seat settings
Multimedia system:
© Comfort Seat Comfort
4 5 5
Adjusting the backrest contour in the lumbar
region of the seat backrest (lumbar)
Select Lumbar.
#
Select the settings Z for the desired seat.
#
Adjust the air cushions.
#
Adjusting the backrest side bolsters
Select Side Bolsters.
#
Adjust the air cushion for the desired seat.
#
Setting the seat heating balance
Select Seat Heating Balance.
#
Adjust the heat distribution for the desired
#
seat.
Setting automatic seat adjustment
& WARNING Risk of becoming trapped
during adjustment of the driver's seat
after calling up a driver profile
Selecting a profile may trigger an adjustment
of the driver's seat to the position saved
under the profile. You or other vehicle occu‐
pants could be injured in the process.
Make sure that when the position of
#
driver's seat is being adjusted using the
multimedia system, no people or body
parts are in the seat's range of move‐
ment.
If there is a risk of someone becoming trap‐
ped, stop the adjustment process immedi‐
ately:
a) Tap the warning message on the
#
media display.
or
b) Press a memory position button or a
#
seat adjustment switch on the driver's
door.
The adjustment process is stopped.
Requirements:
Adapting the driver's seat and steering wheel
R
position to the body size: automatic seat
adjustment has been switched on.
Multimedia system:
© Settings Vehicle
4 5 5
Automatic Seat Adjustment
5
Switching automatic seat adjustment on/off
When the active user profile is changed while
the vehicle is stationary, the driver's seat, steer‐
ing wheel, outside mirrors and seat contour will
automatically be adapted to the driver.
Select On or Off.
#