Mercedes-Benz GLE Operator's Manual page 325

* NOTE Staining caused by leaking tire
sealant
After use, excess tire sealant may leak out
from the filling hose.
Therefore, place the filling hose in the
#
plastic bag that contained the TIREFIT
kit.
+ ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tire sealant contains pollutants.
Have the tire sealant bottle disposed of
#
professionally, e.g. at an authorized
Mercedes-Benz Center.
Stow the tire sealant bottle and the tire infla‐
#
tion compressor.
Pull away immediately.
#
Stop driving after approximately ten minutes
#
and check the tire pressure using the tire
inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tire pressure not being attained
If the specified tire pressure is not reached,
the tire is too badly damaged. The tire seal‐
ant cannot repair the tire in this instance.
The braking and driving characteristics may
be greatly impaired.
Do not continue driving.
#
Consult a qualified specialist workshop.
#
In cases such as the one mentioned above, con‐
tact an authorized Mercedes-Benz Center. Or
call 1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
To increase the tire pressure: switch on
#
the tire inflation compressor.
Breakdown assistance 323
To reduce the tire pressure: press pressure
#
release button 1 next to manometer 2.
When the tire pressure is correct, unscrew
#
the filling hose from the valve of the sealed
tire.
Screw the valve cap onto the valve of the
#
sealed tire.
Pull the tire sealant bottle out of the tire
#
inflation compressor.
The filling hose stays on the tire sealant bot‐
tle.
Drive to the nearest qualified specialist work‐
#
shop and have the tire, tire sealant bottle
and filling hose replaced there.