Table 5-1 Fields In Menu 11.1 (Ethernet Encapsulation) - ZyXEL Communications ZyXEL Prestige 310 User Manual

Prestige 310 Broadband Sharing Gateway
Table 5-1
Field
Rem Node Name
Active
Encapsulation
Service Type
Service Name
Outgoing: My
Login
Outgoing: My
Password
Authen=
CHAP/PAP
Server IP
Route
Edit IP
5-2
Fields in Menu 11.1 (Ethernet Encapsulation)
Enter a descriptive name for the remote node. This field can
be up to eight characters.
Press the [SPACE BAR] to toggle between Yes and No and
activate (deactivate) the remote node.
Ethernet is the default encapsulation. Press the [SPACE BAR]
if you wish to change to PPPoE encapsulation.
Press the [SPACE BAR] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method) or RR-Manager
(RoadRunner Manager authentication method). Choose one of
the RoadRunner methods if your ISP is Time Warner's
RoadRunner; otherwise choose Standard.
This is valid only when you have chosen PPPoE encapsulation.
If you are using PPPoE encapsulation, then type the name of
your PPPoE service here.
This field is applicable for PPPoE encapsulation only. Enter the
login name assigned by your ISP when the Prestige calls this
remote node. Some ISPs append this field to the Service
Name field above (e.g., jim@poellc) to access the PPPoE
server.
Enter the password assigned by your ISP when the Prestige
calls this remote node. Valid for PPPoE encapsulation only.
This field sets the authentication protocol used for outgoing
calls. Options for this field are:
CHAP/PAP - Your Prestige will accept either CHAP or PAP
when requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
This field is valid for RoadRunner service type only. The
Prestige will find the RoadRunner Server IP automatically if this
field is left blank. If it does not, then you must enter the
authentication server IP address here.
This field refers to the protocol that will be routed by your
Prestige – IP only for the P310.
This field leads to a "hidden" menu. Press the [SPACE BAR] to
select Yes and press [ENTER] to go to Menu 11.3 - Remote
Description Examples
LAoffice
Yes
Ethernet
Standard
poellc
jim
*****
CHAP/PAP
IP
Yes
Remote Node Setup