Diagnostic; Wan Dhcp - ZyXEL Communications ZyXEL Prestige 310 User Manual

9.4

Diagnostic

The diagnostic facility allows you to test the different aspects of your Prestige to determine if it is working
properly. Menu 24.4 allows you to choose among various types of diagnostic tests to evaluate your system,
as shown next.
Figure 9-10
Follow the procedure below to get to Menu 24.4 - System Maintenance – Diagnostic.
Step 1. From the Main Menu, select option 24 to open Menu 24 - System Maintenance.
Step 2.
From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System Maintenance -
Diagnostic.

9.4.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in Figure 9-11. LAN DHCP has already
been discussed in section 3.1.5. The Prestige can act either as a WAN DHCP client (IP Address Assignment
field in Menu 4 or Menu 11.3 is Dynamic and the Encapsulation field in Menu 4 or Menu 11 is Ethernet)
or "none", i.e., you have a static IP. The WAN Release and Renewal fields in Menu 24.4 conveniently allow
you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a fashion
similar to winipcfg.
System Information & Diagnosis
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
Menu 24.4 - System Maintenance - Diagnostic
Prestige 310 Broadband Sharing Gateway
9-11