Changing The System Password; Resetting The Prestige - ZyXEL Communications ZyXEL Prestige 310 User Manual

# Menu Title
21 Filter Set Configuration
22 SNMP Configuration
23 System Password
24 System Maintenance
26 Schedule Setup
99 Exit
2.6

Changing the System Password

The first thing your should do before anything else is to change the default system password by following the
steps below.
Step 1. Enter 23 in the Main Menu to open Menu 23 - System Password as shown below.
Step 2. Enter your existing password and press [Enter].
Step 3. Enter your new system password and press [Enter].
Step 4. Re-type your new system password for confirmation and press [Enter].
Note that as you type a password, the screen displays a (X) for each character you type.

2.6.1 Resetting the Prestige

If you have forgotten your password or for some reason cannot access the SMT menu you will need to
reinstall the configuration file. Uploading the configuration file replaces the current configuration file with
the default configuration file, you will lose all configurations that you had before and the speed of the
Hardware Installation & Initial Setup
Use this menu to setup filters to provide security.
Use this menu to setup SNMP related parameters
Use this menu to setup a new password.
This menu provides system status, diagnostics, firmware upload, etc.
Use this menu to schedule outgoing calls.
To exit from SMT and return to the blank screen.
Menu 23 - System Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
Figure 2-6 Menu 23 - System Security
Prestige 310 Broadband Sharing Gateway
Description
2-7