Figure 33 Log Settings; Table 33 Log Settings - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

Figure 33 Log Settings

The following table describes the fields in this screen.

Table 33 Log Settings

LABEL
E-mail Log Settings
Mail Server
Mail Subject
Send Log To
Send Alerts To
SMTP
Authentication
User Name
Chapter 8 Logs
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via
E-mail.
Type a title that you want to be in the subject line of the log e-mail message that the
G-1000 v2 sends. Not all G-1000 v2 models have this field.
The G-1000 v2 sends logs to the e-mail address specified in this field. If this field is
left blank, the G-1000 v2 does not send logs via e-mail.
Alerts are real-time notifications that are sent as soon as an event, such as a DoS
attack, system error, or forbidden web access attempt occurs. Enter the E-mail
address where the alert messages will be sent. Alerts include system errors, attacks
and attempted access to blocked web sites. If this field is left blank, alert messages
will not be sent via E-mail.
SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for the
Internet. SMTP enables you to move messages from one e-mail server to another.
Select the check box to activate SMTP authentication. If mail server authentication is
needed but this feature is disabled, you will not receive the e-mail logs.
Enter the user name (up to 31 characters) (usually the user name of a mail account).
ZyXEL G-1000 v2 User's Guide
83