Applications For The G-1000 V2 - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

ZyXEL G-1000 v2 User's Guide
SNMP
SNMP (Simple Network Management Protocol) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your G-1000 v2 supports SNMP agent functionality, which allows a manager
station to manage and monitor the G-1000 v2 through the network. The G-1000 v2 supports
SNMP version one (SNMPv1) and version two c (SNMPv2c).
Full Network Management
The embedded web configurator is an all-platform web-based utility that allows you to easily
access the G-1000 v2's management settings. Most functions of the G-1000 v2 are also
software configurable via the SMT (System Management Terminal) interface. The SMT is a
menu-driven interface that you can access from a terminal emulator over a telnet connection.
Logging and Tracing
• Built-in message logging.
• Unix syslog facility support.
Diagnostics Capabilities
The G-1000 v2 can perform self-diagnostic tests. These tests check the integrity of the
following circuitry:
• FLASH memory
• DRAM
• LAN port
• Wireless port
Embedded FTP and TFTP Servers
The G-1000 v2's embedded FTP and TFTP servers enable fast firmware upgrades as well as
configuration file backups and restoration.
Wireless Association List
With the wireless association list, you can see the list of the wireless stations that are currently
using the G-1000 v2 to access your wired network.

1.3 Applications for the G-1000 v2

Here are application examples of what you can do with your G-1000 v2.
30 Chapter 1 Getting to Know Your Device