Table of Contents
Advertisement
ZyXEL G-1000 v2 User's Guide
Table 33 Log Settings
LABEL
Password
Log Schedule
Day for Sending
Log
Time for Sending
Log
Clear log after
sending mail
Syslog Logging
Active
Syslog Server IP
Address
Log Facility
Active Log and
Alert
Log
Send Immediate
Alert
Apply
Cancel
8.4 SMTP Error Messages
The following table lists common SMTP errors.
Table 34 SMTP Error Messages
-1 means G-1000 v2 out of socket
-2 means tcp SYN fail
-3 means smtp server OK fail
-4 means HELO fail
-5 means MAIL FROM fail
84
DESCRIPTION
Enter the password associated with the user name above.
This drop-down menu is used to configure the frequency of log messages being sent
as E-mail:
•
Daily
•
Weekly
•
Hourly
•
When Log is Full
•
None.
If you select Weekly or Daily, specify a time of day when the E-mail should be sent.
If you select Weekly, then also specify which day of the week the E-mail should be
sent. If you select When Log is Full, an alert is sent when the log fills up. If you
select None, no log messages are sent.
Use the drop down list box to select which day of the week to send the logs.
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
send the logs.
Select the checkbox to delete all the logs after the G-1000 v2 sends an E-mail of the
logs.
The G-1000 v2 sends a log to an external syslog server.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Select a location from the drop down list box. The log facility allows you to log the
messages to different files in the syslog server. Refer to the syslog server manual for
more information.
Select the categories of logs that you want to record.
Select log categories for which you want the G-1000 v2 to send E-mail alerts
immediately.
Click Apply to save your customized settings and exit this screen.
Click Cancel to return to the previously saved settings.
Chapter 8 Logs
Advertisement
Table of Contents
Troubleshooting
