Figure 12-3 Ip Routing Policy; Table 12-2 Ip Routing Policy - ZyXEL Communications Prestige 645R User Manual

Prestige 645 ADSL Internet Access Router
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu
allows you to configure a policy rule.
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol
Type of Service= Normal
Precedence
Source:
addr start= 1.1.1.1
port start= 20
Destination:
addr start= 2.2.2.2
port start= 20
Action= Matched
Gateway addr
Type of Service= Max Thruput
Precedence
Press Space Bar to Toggle.
FIELD
Policy Set Name
Active
Criteria:
IP Protocol
Type of Service
Precedence
Packet Length
Len Comp
Source:
12-4
Menu 25.1.1 - IP Routing Policy
= 6
= 0
= 192.168.1.1
= 0
Press ENTER to Confirm or ESC to Cancel:

Figure 12-3 IP Routing Policy

Table 12-2 IP Routing Policy

This is the policy set name assigned in Menu 25 – IP Routing Policy Setup.
Press [SPACE BAR] to select Yes to activate the policy.
IP layer 4 protocol, e.g., UDP, TCP, ICMP, etc.
Prioritize incoming network traffic by choosing from Don't Care, Normal, Min
Delay, Max Thruput or Max Reliable.
Precedence value of the incoming packet. Values are 0 to 7 or Don't Care.
Type the length of incoming packets (in bytes). The operators in the Len
Comp (next field) apply to packets of this length.
Press [SPACE BAR] to choose from Equal, Not Equal, Less, Greater, Less
or Equal or Greater or Equal.
Packet length= 40
Len Comp= N/A
end= 1.1.1.1
end= 20
end= 2.2.2.2
end= 20
Log= No
DESCRIPTION
IP Policy Routing