Prestige P645 ADSL Internet Access Router
FIELD
System Name
Choose a descriptive name for identification purposes. This name can be
up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes "-" and underscores "_" are accepted.
Location (optional) Enter the geographic location (up to 31 characters) of your Prestige.
Contact Person's
Enter the name (up to 30 characters) of the person in charge of this
Name (optional)
Prestige.
Protocols:
Press the [SPACE-BAR] to select Yes or No to turn the individual routing
protocols on or off.
Route IP
Set this field to Yes to enable IP routing. You must enable IP routing for
Internet access.
Set this field to Yes to enable IPX routing.
Route IPX
Bridge
Turn on/off bridging for protocols not supported (e.g., SNA) or not turned
on in the previous Route fields.
2.10 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the main
menu, enter 3 to open menu 3.
2-10
Menu 1 - General Setup
System Name= HAL
Location= branch
Contact Person's Name= JohnDoe
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Figure 2-9 Menu 1 – General Setup
Table 2-4 General Setup Menu Fields
DESCRIPTION
Hardware Installation & Setup
EXAMPLE
HAL
branch
JohnDoe
Yes
No
No