Table of Contents
Advertisement
The following table describes the Bridge Static Route Menu.
FIELD
Route Name
Enter a name for the bridge static route for identification purposes.
Use the [SPACE BAR] to select Yes to activate or No to deactivate the static route.
Active
Ether Address
Enter the MAC address of the destination machine that you wish to bridge the packets
to.
IP Address
If available, enter the IP address of the destination machine that you wish to bridge the
packets to.
Gateway Node
Enter the number of the remote node that is the gateway of this static route.
Once you have completed filling in this menu, press [ENTER] at the message [Press ENTER to
Confirm...] to save your configuration, or press [ESC] to cancel.
Bridging Setup
Table 7-3 Bridge Static Route Menu Fields
Prestige P645 ADSL Internet Access Router
DESCRIPTION
7-5
Advertisement
Table of Contents
Troubleshooting
