Using Ip Policy Routing - ZyXEL Communications P-660 series Support Notes

Edit IP
Toggle to 'Yes' to enter menu 3.2.1 for setting up the second and third networks.
Alias
2. Edit the second and third networks in menu 3.2.1 by configuring the P-660's second
and third LAN IP addresses.
Menu 3.2.1 - IP Alias Setup
IP Alias 1=
IP Address=
IP Subnet Mask=
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
IP Alias 2=
IP Address=
IP Subnet Mask=
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Enter here to CONFIRM or ESC to CANCEL:
Key Settings:
Toggle to 'Yes' and enter the second LAN IP address for the P-660. This will
IP Alias 1
create the second route in the enif0:0 interface.
Toggle to 'Yes' and enter the third LAN IP address for the P-660. This will create
IP Alias 2
the third route in the enif0:1 interface.

11. Using IP Policy Routing

• What is IP Policy Routing (IPPR)?
All contents copyright © 2005 ZyXEL Communications Corporation.
Yes
192.168.2.1
255.255.255.0
Yes
192.168.3.1
255.255.255.0
P-660 Series Support Notes
84