Pre-Set Seat Width - Sunrise Medical QUICKIE Sedeo Pro Instructions For Use Manual

4.2 Pre-set seat width

Flip back armrests / Single Post Removable armrests width (Fig. 4.5)
Fine adjustments can be done with the armrest only, for larger
adjustments also pre-set the seat plate width.
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
NOTE / CAUTION!
• Please check that the new arm rest position does not interfere with
any seat positioning.
Reclining flip back armrest width (Fig. 4.6)
1. Remove 2 (A) screws
2. Adjust (B) to desired position
3. Tighten (A)
NOTE / CAUTION!
• Please check that the new armrest position does not interfere with
any seat positioning. If cables are attached, check the length.
Seat plate width (Fig. 4.7)
Lift the seat cushion off the Velcro© strips to access the seat plates.
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
The seat width is indicated by the scale that runs alongside each slot.
Sedeo Pro Rev.B
A
2
A
A
Fig. 4.5
B
1 M5
3 M5
Fig. 4.6
B
2
M5
1
M5
3
Fig. 4.7
B
B
9