Sunrise Medical Breezy Nuage PLS Technical Manual

Sunrise Medical Breezy Nuage PLS Technical Manual

Ibis push chassis, self propelled powersupport and powerdrive

Advertisement

Quick Links

Seating system
Nuage – Sedeo
Combination
Nuage PLS
Nuage PLS
Nuage PLS Active
Nusage Active XS
Ibis Push chassis, Self Propelled
PowerSupport and PowerDrive
TECHNICAL GUIDE
000690430.01
Puma 20 / 40
Puma Yes
Sedeo Pro
Sedeo Original
EN

Advertisement

Table of Contents
loading

Summary of Contents for Sunrise Medical Breezy Nuage PLS

  • Page 1 Seating system TECHNICAL GUIDE Nuage – Sedeo Combination 000690430.01 Nuage PLS Nuage PLS Nuage PLS Active Puma 20 / 40 Nusage Active XS Puma Yes Ibis Push chassis, Self Propelled Sedeo Pro PowerSupport and PowerDrive Sedeo Original...
  • Page 2 Nuage...
  • Page 3 Sunrise Medical executes a policy of continuous improvement and reserves the right to changes and modifications. The information provided is valid for the product in its standard version. Sunrise Medical can therefore not be held liable for any damage resulting from specifications of the product deviating from the standard configuration. Illustrations contained in the manual may deviate from the configuration of your product.
  • Page 4: Table Of Contents

    Nuage Table of contents Introduction ............................... 5 This manual Identification of the product Symbols used in this manual Safety .................................. 6 Personnel qualification Moving parts Markings on the seating system Marking on the Wheelchairs Identification of the product Parts in box and tools to use ........................... 9 Parts in box Tools to use Nuage systems ..............................
  • Page 5: Introduction

    For each wheelchair frame model a different setting is needed, if in doubt either contact Sunrise Medical or Revalidatiestoffeerderij Keizer B.V. Mechanics who do the mounting and repairs on the Nuage seating systems or wheelchairs must be well trained and familiar with the repair methods and the maintenance of the Nuage PLS seating systems and Breezy/Quickie Wheelchairs.
  • Page 6: Safety

    Nuage Safety 2.1 Personnel qualification Repairs may only be carried out by trained, experienced or authorised service technicians. During the execution of their work, they are at all times fully responsible for the fulfilment of locally applicable safety guidelines and standards. Temporary employees and persons in training may only carry out repair and replacement work under the supervision of an authorised service technician.
  • Page 7: Marking On The Wheelchairs

    Nuage 2.4 Marking on the Wheelchairs Never remove or cover up the markings, symbols and instructions affixed to the seating system. These safety measures must remain present and clearly legible throughout the entire lifespan of the seating system. Replace or repair any markings, symbols or instructions that have become illegible or damaged immediately. Please contact your dealer for assistance.
  • Page 8: Identification Of The Product

    Nuage 2.5 Identification of the product The identification plate contains the following data: A. Model B. Year of manufacture C. Identification number D. Use area indoors or outdoors E. Maximum load in kg The location of the identification plate is indicated with A. Warning! Lighted cigarettes and/or burning matches dropped onto the Nuage PLS seating system can cause a fire resulting in death, serious injury, or damage.
  • Page 9: Parts In Box And Tools To Use

    Mounting sets Parts in mounting sets vary per wheelchair model. Order the appropriate sets compatible with your wheelchair model or contact Sunrise Medical for tailor solutions. 3.2 Tools to use The tools below are needed for various mechanical settings and maintenance:...
  • Page 10: Nuage Systems

    Nuage Nuage systems This technical manual applies to: Nuage PLS Nuage PLS Active Nuage PLS Active XS Nuage PLS with integrated abduction cushion Nuage PLS Active with integrated abduction cushion Nuage PLS Active XS with integrated abduction cushion Mounting sets The mounting set must be chosen in accordance with the wheelchair model.
  • Page 11: Mounting Instructions

    Nuage Mounting instructions 6.1 Glossary Nuage PLS Seating system for full body and leg support of passive users with strongly reduced postural stability. Nuage PLS Active Seating shell for combined body support and stimulation of (postural) activity in semi-passive users with reduced postural stability.
  • Page 12: Assembly Instructions - Nuage Pls Series On Ibis And Puma 20/40 Wheelchairs With Sedeo Pro

    Nuage 6.4 Assembly instructions – Nuage PLS series on Ibis and Puma 20/40 wheelchairs with Sedeo Pro This chapter covers illustrated assembly instructions. Every separate visual instruction is prefaced with: • Preparation instructions • Relevant article numbers • Tools used •...
  • Page 13 Nuage + 50 cm 40 - 50 cm 30 - 40 cm...
  • Page 14: Mounting The Back Shell Parts

    Nuage 6.6 Mounting the back shell parts Instructions The following operations are required to mount the back shell parts: • Identify the metal parts for mounting the back shells. (Picture 1 = Sedeo Pro, 1B is Sedeo Orignal and orthosis backframe Sedeo Pro) •...
  • Page 15: Fitting The Webbing

    Nuage 6.7 Fitting the webbing Preparation • Adjust the seat width and backrest width according to the instructions in the user manual. • Identify the back webbing set: six webbing straps with adjustable buckles plus one simple webbing strap. • Identify the seat webbing set: four webbing straps with adjustable buckles and four simple webbing straps. Instructions •...
  • Page 16: Mounting The Calf Plates

    Nuage 6.8 Mounting the calf plates Instructions Sedeo pro The following operations are required to mount the calf plates on a Sedeo Pro central legrest: Use the bolts to attach the calf support mounting to the Sedeo Pro central legrest. Mount the metal rod (15 x 15) on the calf support mounting set, (use distance bushes).
  • Page 17: Fitting The Cover

    Nuage 6.9 Fitting the cover Instructions The following operations are required to assemble the fit the cover: • Drape the stretch cover over the seat, positioning the padded cushion inserts inside the contours of the seat and backrest shells. • Temporarily lift the back flap of the cover •...
  • Page 18: Mounting The Foot Plate

    Nuage 6.10 Mounting the foot plate Instructions The following operations are required to mount a Nuage PLS series footplate on a Sedeo foot plate: • Pinch holes for the bolts in the footplate cover. • Place the Nuage PLS series footplate and the Sedeo footplate upside down. •...
  • Page 19: Mounting And Placing Armrest Pads

    Seating system not working as it should Contact Revalidatiestoffeerderij Keizer B.V. Problems with assembling or adjusting the seating system correctly Contact Revalidatiestoffeerderij Keizer B.V. Contact Sunrise Medical customer service Problems with the Ibis or Puma wheelchair Contact Sunrise Medical customer service...
  • Page 20 Sunrise Medical Aps E: info@sunrisemedical.nl E-mail : info@keizerstoffeert.nl Mårkærvej 5-9 www.SunriseMedical.nl Web : www.keizerstoffeert.nl 2630 Taastrup Denmark Sunrise Medical HCM B.V. +45 70 22 43 49 Vossenbeemd 104 info@sunrisemedical.dk 5705 CL Helmond Sunrisemedical.dk The Netherlands T: +31 (0)492 593 888 E: customerservice@sunrisemedical.nl...

Table of Contents