Pre-Set Fixed Center Mount Legrest - Sunrise Medical QUICKIE Sedeo Pro Instructions For Use Manual

4.9 Pre-set Fixed center mount legrest

Lower leg length (Fig 4.36)
1. Loosen (A) by one turn
2. Adjust (B) to the desired position
3. Tighten (A)
4. Repeat for the other side.
Ankle angle (Fig 4.37)
1. Flip up (A).
2. Turn (B) in order to adjust the ankle angle as desired
(4 mm Allen key)
3. Fold (A) down.
DANGER! / WARNING!
• After adjustment and with the seat in its normal drive position:
Ensure there Is a gap of, (>25 mm.), between the floor and the
footplate at all times.
• Perform this test with the user sitting in the chair loading the
legrest
• Using the chair with the legrest set too low might result in personal
injury or damage to the wheelchair and its surroundings.
Calf pad height (Fig 4.38)
1. Loosen (A) by one turn.
2. Adjust (C) to the desired position.
3. Tighten (A).
Calf pad width (Fig 4.38)
4. Loosen (B) by one turn.
5. Adjust (C) to the desired position.
6. Tighten (B).
18
A
2
B
A
1
B
C
2
B
A
Fig. 4.36
M5
1
M5
3
Fig. 4.37
M4
2
Fig. 4.38
5
M5
1 4
3 6 M5
Sedeo Pro Rev.B