Garmin GI 275 Pilot's Manual page 57

maintained. If the trend vector crosses V
to amber. The trend vector is absent if the speed remains constant or if any data needed
to calculate airspeed is not available due to a system failure. Exceeding V
indicated airspeed becoming white with a red background.
Amber Numbers
NOTE: Depending on installation and configuration, exceeding or going below
certain airspeeds may result in various actions including warnings and/or autopilot
disconnects. Consult your installer for details.
Vspeed References
Depending on configuration, various Vspeed references ("bugs") including Glide, V
V , and V are available.
le r
Enabled Vspeeds display at their respective locations on the airspeed indicator tape.
Toggling Vspeed visibility (except V
1) From the 'ADI' Page, open the menu and select Options > Airspeeds.
2) Select the All On, All Off, or specific Vspeed Buttons desired.
Adjusting Vspeed values (except V
1) From the 'ADI' Page, open the menu and select Options > Airspeeds.
2) Use the Outer Knob to highlight the Vspeed requiring adjustment.
3) Use the Inner Knob to adjust the Vspeed, clockwise to increase and counterclockwise to
decrease. Changes are saved automatically and restore to defaults on unit restart.
Adjusting Vspeed values (except V
1) From the 'ADI' Page, open the menu and select ADI Options > Airspeeds.
2) Select the Vspeed requiring adjustment.
3) Use the Knobs or keypad to adjust the Vspeed. Changes are saved automatically and
restore to defaults on unit restart.
190-02246-01 Rev. A
Airspeed Indicator (Approaching and Exceeding V
, V
le
, V
le
, V
le
Garmin GI 275 Pilot's Guide
, the text color of the indicated airspeed changes
ne
, and V ):
mca yse
, and V ) on a Primary ADI:
mca yse
, and V ) on a Standby ADI:
mca yse
Flight Instruments
results in the
ne
Red Background
)
ne
, V
x
,
y
35