Flight Plan / Direct To Navigation From External Source - Garmin GI 275 Pilot's Manual

Navigation
Nearest Airport Criteria
Adjusting the Airport Criteria for minimum runway length and surface type controls which
airports should be displayed on the Nearest List for Direct To navigation. A minimum runway
length and/or surface type can be entered to prevent airports with small runways or runways
that are not appropriately surfaced from being displayed.
Changing the airport criteria for nearest Direct To airports:
1) From any page, open the menu. Select System > Setup > Airport Criteria.
2) Select the Runway Surface Button. Then, select the desired Surface Criteria Button.
3) Select the Runway Length Button. Enter the desired minimum runway length using the
keypad and press the Enter Button.

FLIGHT PLAN / DIRECT TO NAVIGATION FROM EXTERNAL SOURCE

NOTE: To receive flight plan data, a compatible external source must be configured.
The MFI can be configured to receive flight plan and Direct To navigation from another
onboard compatible source, including Integrated Flight Deck systems, Flight Displays, Touch
Navigators, and GPS Navigators.
All adjustments to the active flight plan or Direct To leg must be done using the external
source. Once adjustments are made, the changes are synced to the MFI. Flight plan legs are
displayed on the maps, and flight plan data is displayed on the 'MFD Data' Page.
108
Select to
access
Airport Setup
Select to
change runway
surface settings
Select to
change runway
length settings
Nearest airport settings
Garmin GI 275 Pilot's Guide 190-02246-01 Rev. A