Siemens SINUMERIK 802C base line Technical Manual page 97

32910 DYN_MATCH_TIME
– Time constant of dynamic adaption (control parameter set
no): 0...5
0
32920 AC_FILTER_TIME
s Smoothing factor time constant for adaptive control
_always 0.0
33050 LUBRICATION_DIST
mm, Traversing distance for lubrication from PLC
deg.
_always 100000000
34000 REFP_CAM_IS_ACTIVE
– Axis with reference point cam
_always 1
34010 REFP_CAM_DIR_IS_MINUS
– Approach reference point in minus direction
_always 0
34020 REFP_VELO_SEARCH_CAM
mm/min, Reference point approach velocity
rev/min
_always 5000.0
34030 REFP_MAX_CAM_DIST
mm, Maximum distance to reference cam
deg.
_always 10000.0
34040 REFP_VELO_SEARCH_MARKER
mm/min, Creep speed (encoder no.)
rev/min
_always 300.0
34050 REFP_SEARCH_MARKER_REVERSE
– Direction reversal to reference cams (encoder no.)
_always 0
34060 REFP_MAX_MARKER_DIST
mm, Maximum distance to reference mark. Max. distance to 2
deg. reference marks
for distance–coded measuring systems.
_always 20.0
SINUMERIK 802C base line
Start-Up
0.0
0.0
0.0
***
***
0.0
0.0
0.0
***
0.0
Technical Appendix
NEW_CONF
plus DOUBLE 2/7
POWER ON
plus DOUBLE 2/7
NEW CONF
plus DOUBLE 2/7
RESET
*** BOOLEAN 2/7
RESET
*** BOOLEAN 2/7
RESET
plus DOUBLE 2/7
RESET
plus DOUBLE 2/7
RESET
plus DOUBLE 2/7
RESET
*** BOOLEA 2/7
RESET
plus DOUBLE 2/7
6-9