Checking The Result In Immediate Tx Result Report; Checking The Result In Communication Failure Report; Checking The Result In Error Report; Viewing Memory Storage Report - Ricoh IM C6500 User Manual

To configure auto print, select bit number [0] under switch number [03], and change the current value to
"1".
See "Changing the Parameter Settings", User Guide (Full Version).

Checking the Result in Immediate TX Result Report

In the factory default setting, the machine is configured not to print the report automatically. Specify Auto
Print to print it every time you send a document by Immediate Transmission.
To configure Auto Print, select bit number [5] under switch number [03], and change the current value to
"1".
See "Changing the Parameter Settings", User Guide (Full Version).
• If the page was sent successfully, the Page column gives the total number of pages sent
successfully.

Checking the Result in Communication Failure Report

This report is printed if the fax could not be sent to all specified destinations by Memory Transmission
when Fax is not set to Auto Print (the factory default setting).

Checking the Result in Error Report

This report is printed if a fax could not be sent by Immediate Transmission when Immediate Transmission
Result Report is not set to Auto Print (the factory default setting).

Viewing Memory Storage Report

Memory Storage Report is printed when the document to send by Memory Transmission could not be
stored in the memory. If you want to, print the report as a record, and print it even if the document was
stored correctly.
To print the Memory Storage Report every time a document is stored in the memory, select bit number
[2] under switch number [03], and change the current value to "1".
See "Changing the Parameter Settings", User Guide (Full Version).
• Even if the machine is set up not to print this report, it is still printed if an original could not be
stored.
Viewing the Transmission Result of Sent Faxes
95