Ricoh IM C6500 User Manual page 301

Message
"Cannot add any more
scanning mode."
"Cannot connect to the
scanner. Check the
network Access Mask
settings in User Tools."
"Failed to connect to the
destination. Please
contact the administrator
to check the following.
*The correct root
certificate is registered to
this machine and
destination. *The root
certificate check function
is not enabled by
mistake."
"Cannot specify any
more scanning area."
"Communication error
has occurred on the
network."
Cause
The maximum number of
scanning modes that
can be registered
exceeds the maximum
number (100).
An access mask is
specified.
The firewall function is
enabled on the
computer.
The maximum number of
scanning areas that can
be registered exceeds
the maximum number
(100).
A communication error
has occurred on the
network.
When a Message Appears While Using the Scanner Function
Solution and reference
Delete scanning modes that are no longer
necessary.
Consult your administrator.
Configure the firewall function of the computer
to allow communication of the application
used, or disable the firewall function.
Delete scanning areas that are no longer
necessary.
Check that the settings for the communication
protocol (TCP/IP) are configured correctly on
the computer.
299