Troubleshooting; Programming - Jackson Delta HT-E-SEER-S Installation, Operation And Service Manual

TROUBLESHOOTING

MODEL
CONFIRMATION
07610-004-54-86-D
To access programming mode, the machine should be on and not in cycle.
The machine's program number must be correct to ensure the machine works
properly. To confirm the program number:
1. Press and hold the I and III Buttons until "Program" flashes (2–3 seconds).
2. Confirm bottom display shows "8." If not, contact a qualified service agency.
3. Press the Delime Button to exit.

PROGRAMMING

P R O G R A M
P R O G R A M
8
1 5 0 F
R E A D Y
C Y C L E 1
23