Winch Will Not Operate - Genie Superlift SL-5 Parts & Service Manual

Section 5 - Troubleshooting Flow Charts
Chart 3
Winch Will
Not Operate
5 - 4
Check position of load
obstructions
for proper centering and
no obstructions.
no obstructions
bad
Check hold down
latches for proper
operation.
good
Check the cable for
binding at the winch
binding
drum and inside the
mast.
not binding
Check winch for proper
operation. See
bad
Maintenance procedure
A-4, Check the Winch
Operation.
good
bad
Check carraige and
mast for damaged
column(s).
good
Consult Genie
Industries Service
Department.
Genie Superlift
Parts and Service Manual - First Edition
Replace damaged part.
Remove the bound up
cable and inspect the
bad
cable and related
components for
damage.
Replace the damaged
component. See Repair
procedure 3-1, How to
Repair the Winch -
Single Speed.
Replace damaged
column OR consult
Genie Industries
Service Department.
Re-position load to
eliminate obstruction.
Be sure load is properly
centered.
Replace the damaged
component(s).
Part No. 32283