Bypass Copying - Sharp AR-650 Operation Manual

12. BYPASS COPYING

The bypass copying m ode is convenient in the follow ing instances:
• w hen the size of any of the paper cassettes installed in the copier is not that w hich you
require.
• w hen you w ant to use a special type of paper such as OHP film .
1
Place the original(s) on the original feed
tray or on the glass.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
Note: Rem ove any paper clips or staples from
originals before placing them on the
original feed tray.
. After lifting the autom atic docum ent feeder,
place the original on the glass face dow n w ith
the bottom tow ard you and the left side
centered against the original scale.
2
Select
reproduction ratio.
48
Downloaded from: http://www.usersmanualguide.com/
t he desired exposure and
Slides