Table of Contents
Advertisement
5. REDUCTION AND ENLARGEMENT COPYING (Cont.)
When Placing the Original on the Glass
. After lifting the autom atic docum ent feeder,
place the original on the glass face dow n w ith
the bottom tow ard you and the left side
centered against the original scale.
. Close the autom atic docum ent feeder slow ly
after the original size has been detected.
5
Select the desired exposure and copy
quantity.
6
Press the START key.
Note: If there are sheets of paper set on the sheet bypass, you m ust press the COPY-SIZE key
corresponding to the size of the sheets. (See page 50.)
Using the Zoom Keys
1
Press the cassette of the desired paper size
on the display.
2
Press the ZOOM ORG.→COPY key.
3
Select the desired reproduction ratio using
the ZOOM keys.
. For enlargem ent, use the
reduction, use the
. Each tim e you press either ZOOM key, the
reproduction ratio changes by 1%. Holding
dow n the key changes the reproduction ratio
continuously.
. Pressing the 400% key or the 25% key causes
400% or 25% to be im m ediately displayed.
. Pressing the 100% key returns the copier to
actual-size copying.
32
Downloaded from:
http://www.usersmanualguide.com/
UP key. For
Dow n key.
Advertisement
Table of Contents
