Table of Contents
Advertisement
4
Press the SET key.
. The set m argin default is 7 m m .
. To change the m argin:
Press the
the desired m argin setting, and press the SET
key.
. When com bining im age shifting w ith duplex
copying, select FRONT for the front side and
BACK for the back side of the copy.
5
Place the originals on the original feed tray
or on the glass.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. Place the original on the glass face dow n w ith
the bottom tow ard you and the left side
centered against the original scale.
6
Select the desired copy size, exposure,
reproduction ratio and copy quantity.
7
Press the START key.
Tip: M argins can be created also in the bypass
copy m ode. To do this, set the paper in the
sheet bypass (see page 50), and press the
desired COPY-SIZE key to select the paper
size. If LETTER-R paper is used, press the
corresponding COPY-SIZE key tw ice.
Downloaded from:
http://www.usersmanualguide.com/
0m m or 30m m
key to select
57
Advertisement
Table of Contents
