Table of Contents
Advertisement
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray. The
procedure described below is useful for users of the copier without an
optional duplex module (AR-DU2N).
2
1
2
1
4
3
4
3
INFORMATION
INTERRUPT
8/ 11
1
2
PAPER TYPE
CUSTOM
SETTINGS
.8/ 11
1
16~28 lbs.
2
11 17
28+~35 lbs.
CLEAR
CA
ALL
8/ 14
1
35+~55 lbs.
2
TRANSPARENCY
C
100%
ER SELECT
COPY RATIO
CLEAR
Place the first original face down on the document glass
1
and make a copy.
The first side of the copy can be made using any of the paper feed
stations.
Remove the first original and place the second original
2
face down on the document glass.
Make sure the first and second originals are oriented in the same
way on the document glass.
If an optional document feeder is used, the originals must be fed
one at a time.
Turn the first copy over without changing its top-bottom
3
orientation and place it into the bypass tray.
Be sure to feed the copies one sheet at a time.
1 2
Press the "PAPER SELECT" key and select the desired
4
paper type in the bypass tray section.
Press the COLOR COPY START (
5
COPY START (
SPECIAL PAPERS (manual feed)
) key.
) key or BLACK
2-15
Advertisement
Table of Contents
