Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray,
when the heavy paper which is out of spec. for duplex module is
used.
2
1
2
1
4
3
4
3
CA
A4
A4
A3
O A4
100%
R SELECT
COPY RATIO
Place the first original face down on the document glass
1
and make a copy.
The first side of the copy can be made using any of the paper feed
stations.
Replace the first original with the second original and
2
close the document cover.
Make sure the first and second originals are oriented in the same
way on the document glass.
The first and second originals can be set in the document feeder
tray. However, they must be set individually.
Turn the first copy over without changing its top-bottom
3
orientation and place it into the bypass tray.
Be sure to feed the copies one sheet at a time.
1 2
Press the "PAPER SELECT" key and select the bypass
4
CLEAR ALL
tray.
START
Press the START (
5
SPECIAL PAPERS (manual feed)
) key.
2-15