Tr-300 Batteries And Chargers: Cleaning - 3M Versaflo TR-300 PAPR Manual

3M™ Versaflo™ Powered and Supplied Air Respiratory Systems

TR-300 Batteries and Chargers: Cleaning

Solvents should not be used to clean the battery pack or

battery charger. Liquid solvents may chemically weaken the y
plastic. Use the following suggested procedures for cleaning:
1. Do not immerse the battery pack or battery charger in any type of
liquid. q
2. Wipe the bottom of the charger (without electrical contacts) with a soft
cloth dipped in mild cleaning solution.
3. Clean the outer surfaces of the battery pack with a soft cloth
dampened in a solution of water and mild, pH neutral detergent.
4. Rinse by wiping with a soft cloth dipped in clean water. Wipe dry.
5. 5. Ensure the electrical contacts of the battery pack are Ensure the electrical contacts of the battery pack are
Consult the TR-300 PAPR User Instructions, TR-300
Battery and Charger User Instructions, and Technical Battery and Charger User Instructions and Technical
Data Bulletin #198 for additional guidance.
29
© 3M 2011. All Rights Reserved. Rev 1
g q
g
y y
y p
completely completely
g
dry. dry.