3M™ Versaflo™ Powered and Supplied Air Respiratory Systems
Installing and Removing the Breathing Tube
g
Insert the end of the breathing tube with
the bayonet fitting (two small prongs)
into the parallel slots in the air outlet of
the motor/blower (1).
Twist the breathing tube ¼ turn to the
right to lock it into place (2)
right to lock it into place (2).
Reverse steps to remove.
Refer to the User Instructions for the
Refer to the User Instructions for the
relevant headgear for procedures to
connect the breathing tube to the
headgear.
headgear
47
© 3M 2011. All Rights Reserved. Rev 1
p
g
g