Cleaning The Breathing Tube - 3M Versaflo TR-300 PAPR Manual

3M™ Versaflo™ Powered and Supplied Air Respiratory Systems

Cleaning the Breathing Tube

g
Clean the connection sites on the breathing tube with water

and detergent solution.
The breathing tube can be immersed in water for cleaning.

The inside of the breathing tube must be completely dried

prior to use or storage.
Air dry the breathing tube or dry it by connecting to the Air dry the breathing tube or dry it by connecting to the
 
motor/blower unit and forcing air through the tube until dry.
Inspect according to the TR-300 PAPR User Instructions spec acco d g o e

before each use.
Optional breathing tube covers (BT-922, BT-926) are

available.
48
© 3M 2011. All Rights Reserved. Rev 1
g
300 Use st uct o s