Flywheel - Husqvarna 525HE3 Workshop Manual

5. Remove the clutch assembly (A) and the adapter
(B).
B
A
6. Install in the opposite sequence.
6.9.3 To clean and examine the centrifugal clutch
1. Examine the clutch drum on the shaft for wear and
To examine the clutch drum on
damage. Refer to
page 25 .
2. Clean and examine the spring and the clutch shoes
carefully. Replace damaged parts.
6.9.4 To examine the clutch drum
1. Examine the clutch drum for wear. Replace the
clutch drum if it is worn or damaged.

6.10 Flywheel

6.10.1 To remove the flywheel
1. Remove the clutch housing and clutch. Refer to
disassemble and assemble the clutch drum and the
clutch housing on page 23 .
2. Remove the centrifugal clutch. Refer to
and install the centrifugal clutch on page 24 .
3. Remove the spark plug. Refer to
install the spark plug on page 26 .
4. Remove the ignition module. Refer to
and install the ignition module on page 28 .
1371 - 001 - 02.07.2020
5. Put the piston stop in the spark plug hole. Remove
6. Remove the flywheel from the crankcase with a
To
To remove
To remove and
To remove
the nut (A) that holds the flywheel.
A
flywheel removal tool. Refer to
page 11 .
Servicing tools on
Repair instructions - 25