Adjusting The Image Quality; Focus Adjustment - Yamaha LPX-510 Owner's Manual

Adjusting the Image Quality

The quality of the screen images can be adjusted as follows.

Focus adjustment

1
2
3
16
STANDBY/ON
ESCAPE MENU
IRIS
PATTERN SETTING
ESCAPE
ASPECT INPUT
Projector
Remote control
STANDBY/ON
IRIS
ESCAPE
ESCAPE MENU
PATTERN SETTING
ASPECT
ASPECT INPUT
LIGHT
Projector
Remote control
STANDBY/ON
ESCAPE MENU
IRIS
PATTERN SETTING
ESCAPE
ASPECT INPUT
Projector
Remote control
Press the [SETTING] button on the
projector's control panel or the
button on the remote control.
ZOOM FOCUS
An adjustment icon will be displayed over the
SETTING PATT
image during projection.
MENU
The adjustment mode changes as follows each
time the [SETTING] button on the projector's
control panel is pressed.
Zoom → → → → Focus → → → → Iris
Adjust the focus.
SETTING PATT
If using the projector's control panel, press the
MENU
or button to adjust the image size.
If using the remote control, tilt the
adjust the image size.
INPUT
Adjustment is also possible while a test pattern is
HIDE
being projected.
Exit adjustment mode.
Press the [ESCAPE] button on the projector's
control panel or the
ZOOM FOCUS
control.
SETTING PATT
When the electronic focus lock is set to
MENU
"ON", the projection size cannot be
adjusted.
The
time. To carry out adjustments, change
the focus lock setting to "OFF". (p.34)
FOCUS
button to
button on the remote
FOCUS
symbol will be displayed at this