Using the Menu Functions
Input Signal
Main menu
Video Signal
Input A
Input B
Language
This sets the display language for messages and menus. (Default setting:English
(Varies depending on country of purchase))
Reset
This returns all adjustment values in the "Setup" menu (other than the "User's Logo", "Input Signal" and
"Language" command settings) to their default values.
"Info" Menu
The "Info" menu shows information about the operating status of the projector such as lamp usage time,
image source, input signal, input resolution, video signal format, refresh rate and sync information.
"Reset" Menu
Lamp-Hours Reset
This initialises the lamp operating time. When this command is selected, the cumulative operating time for
the lamp is cleared and returned to the default setting.
Memory Reset
This resets (clears) all settings that have been stored using the "Memory Save" command.
All Reset
This resets all menu command settings. However, the "Memory Save", "User's Logo", "Input Signal", "Lamp
Hours" and "Language" settings are not reset.
36
Sets the signal format in accordance with the video equipment that is connected to the
VIDEO or S VIDEO port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being
projected occurs even though "Auto" has been selected, select the correct signal format
manually.
Sets the signal format in accordance with the video equipment that is connected to the
INPUT A or INPUT B port or the signal being output from a computer.
Function
Default
setting
Auto
Component