Turning On The Power And Projecting Images - Yamaha LPX-510 Owner's Manual

Turning On the Power and Projecting Images

1
2
ESCAPE
PATTERN
ASPECT
The buttons on the remote control and the projector's control panel cannot be
operated while the
3
If more than one signal source has been connected or the images are not
being projected, use the remote control or control panel buttons to select the
signal source.
Port
INPUT A
INPUT B
S VIDEO
VIDEO
D4 VIDEO
HDMI
Source
Input A
Input B
S-Video
Video
D4
HDMI
Lights green
STANDBY/ON
MENU
ZOOM FOCUS
IRIS SETTING PATT
SETTING
MENU
ESCAPE
INPUT
Projector
Remote control
indicator is flashing green. Wait until it lights steadily.
Button to press
Projector or
Remote control
remote control
A
B
[INPUT]
S VIDEO
or
VIDEO
INPUT
D4
HDMI
If you press the [INPUT] button on the projector's control panel or
the
INPUT
displayed.
If you select
signal format will be displayed. Select the format which matches
the video signals from the connected equipment.
If using the remote control, the signal format changes in the
following order each time the
Component → → → → RGB TV → → → → RGB PC
Turn on the power for all equipment
connected to the projector.
For a video source, press the [Play] button at the
video source to start playback.
Press the [STANDBY/ON] button on the
projector's control panel or the
button on the remote control to turn on
the power.
The indicator flashes green, and after a
short period projection starts.
Check that the
flashing and lights green.
Display at top-right of screen
INPUT A (Component) or INPUT A (RGB TV) ,
INPUT A (RGB PC)
INPUT B (Component) or INPUT B (RGB TV) ,
INPUT B (RGB PC)
S-Video
Video
D4 (Component)
HDMI (Component) , HDMI (RGB TV) , HDMI (RGB PC)
button on the remote control, the selection menu will be
INPUT A or INPUT B
" " "
or
A
Turning On the Projector
indicator has stopped
, a menu for selecting the
"
button is pressed.
B
7