Yamaha LPX-510 Owner's Manual page 33

Signal
Progressive
p.32
Motion Detection
Noise Reduction
Overscan
Setup Level
DVI-Video Level
Screen Position
p.33
Zoom Caption
Keystone
Projection
Operation
Sleep Mode
p.34
Lamp Power
Standby Mode
Trigger Out
User's Logo
p.35
Lock Setting
LCD Panel Adjustment
On-Screen
Menu Position
Display
p.35
Navigation Bar
Menu Color
Message
Hide Screen
Startup Screen
Input Signal
Video Signal
p.36
Input A
Input B
Language
p.36
Reset
p.36
Lamp Hours
The message text will be displayed in red when it is time to replace the lamp.
Time from 0H to 10H will be displayed as 0H. From 10H onwards, the display will be in units of 1H.
Source
Input Signal
Resolution
Resolution
Video Signal
Refresh Rate
Sync Info
The "Info" menu is only used to display the projector status.
When component video
When component video signals or RGB video signals are being input to the HDMI port:
(Varies depending on country of purchase)
Median value (0)
Front , Front/Ceiling, Rear,
OFF , 5min., 10min., 30min.
100(Depends on picture mode)
RS-232C Off
Lamp , Fan , RS-232C
Center-right,
Auto , NTSC , NTSC4.43, PAL , M-PAL, N-PAL, PAL60, SECAM
Yes, No
Using the Menu Functions
or RGB video signals are input:
Vertical Size
Zoom Position
Rear/Ceiling
, RS-232C On
Focus Lock
Zoom Lock
Key Lock
Top-left, Top-center, Top-right, Center-left,
Center , Bottom-left, Bottom-center, Bottom-right
Color 1 , Color 2, Color 3, Color 4
Component
Component
Lamp-Hours Reset
Memory Reset
All Reset
Only displayed for composite video/S-Video input
Only displayed for component video/RGB-Video/Computer input
Only displayed for Computer input
indicates default settings
OFF, Video, Film/Auto
Median value (3)
OFF , NR1, NR2
Standard , Full
Auto , Standard, Larger
0% , 7.5%
Normal , Expanded
Minimum value (0)
Median value (0)
ON, OFF
ON, OFF
ON, OFF
ON , OFF
ON , OFF
Black , Blue, Logo
ON , OFF
, RGB TV, RGB PC
, RGB TV, RGB PC
(Varies depending on country of purchase)
Yes, No
p.XXX
p.36
Yes, No
p.36
Yes, No
p.36
29