Retrieving Saved Image Quality Settings - Yamaha LPX-510 Owner's Manual

2
Image Setup
Picture Quality
Color Adjustment
Picture Mode
Memory Save
Reset
:Return :Select :Enter
ESC
3
STANDBY/ON
ESCAPE MENU
PATTERN
ASPECT INPUT
Projector
[Memory]
Memory1
Memory2
Memory3
Memory4
Memory5
Memory6
ESC :Return :Select :Setting

Retrieving Saved Image Quality Settings

S VIDEO
VIDEO
MEMORY
1
4
Remote control
Select "Memory Save" from the sub-
Info Reset
menu of the "Image" menu, and then
Return
press the
control panel or the
Dynamic
remote control.
Select the memory number (1 - 6) to use
IRIS SETTING PATT
for saving the settings, and then press
MENU
ESCAPE
the
panel or the
SETTING
control.
ASPECT INPUT
The icon for the memory number selected will
LIGHT HIDE
change from
Remote control
Return
Press one of the remote control
A HDMI
memory buttons [1] to [6]
B D4
INPUT
corresponding to the image quality
2 3
settings to be retrieved.
5 6
The selected memory number will be displayed at
the top-right of the screen, and the setting values
will be applied to the images that are being
projected.
Memory 5
Functions for Enhancing Projection
button on the projector's
button on the
button on the projector's control
button on the remote
to .
If you select a memory number that
already contains stored settings, the
previous settings will be cleared and the
current settings will be stored in their
place.
• • • •
If you press one of the remote control
memory buttons [1] to [6] that has no
stored memory settings, the images
being projected will not change.
• • • •
Memory settings that have been
applied to images will be retained even
when the projector's power is turned
off. The same memory adjustment
settings will be applied to images that
are projected the next time the
projector's power is turned on.
• • • •
The aspect setting retrieved from
memory may not be applied to the
images if they are 16:9 images or if the
input signal images have a particular
resolution.
27