Displaying A Test Pattern - Yamaha LPX-510 Owner's Manual

Adjusting the Screen Image

Displaying a Test Pattern

You can project a test pattern at times such as when setting up the projector in order to correct keystone
correction and to make line menu adjustments.
• • • • Crosshatch
• • • • Grayscale pattern
1
2
3
14
This can be used to check whether the projector is tilted or set up
vertically in front of the screen.
This is used when adjusting brightness or when adjusting image quality
or color tone.
The adjustment is made using the line menu. Adjustments other than
brightness are not possible when no image signals are being input.
Test Pattern
Cross-hatching
Gray Scale
Exit
STANDBY/ON
IRIS
ESCAPE
ESCAPE MENU
PATTERN SETTING
ASPECT
ASPECT INPUT
LIGHT
Projector
Remote control
STANDBY/ON
IRIS
ESCAPE
ESCAPE MENU
PATTERN SETTING
ASPECT
ASPECT INPUT
LIGHT
Remote control
Projector
Press the [PATTERN] button on the
projector's control panel or the
button on the remote control.
A pattern select menu will be displayed.
Select a pattern.
SETTING PATT
If using the projector's control panel, press the
MENU
or button.
If using the remote control, tilt the
vertically.
INPUT
HIDE
Confirm the pattern selection.
SETTING PATT
Press the
MENU
panel or the
INPUT
HIDE
PATT
button
button on the projector's control
button on the remote control.